PN-465U CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTION
2 – 26
• Installing contents check
Check the contents of installation, and press [Next] button.
• Installation completion screen
After completion of installation, the installation completion screen is
displayed. Press [Finish] button.
4-3. FIRMWARE UPDATE
To update the firmware, click the icon of “SHARP PN-465U Firmware-
Updater” to boot the updater program, and follow the instructions on the
screen.
• COM port selection
Select the COM port to be used for communication.
(“COM1” on the above screen)
• Batch file setting
Set the batch file name as “C:\SHARP_PN465U\isp_flash16_ext.txt”.
(It is set as the default. Do not change it.)
To Next Page
Loading...
