Sharp PN-465U - Page 39

PN-465U CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTION
2 – 30
3) Check “Send line ends with line feeds” and “Echo typed charac-
ters locally” and press [OK].
4) Press [Enter] key once and check to confirm that “OK” is returned.
If “OK” is returned, the connection is proper.
5) Send the EDWP command.
Enter “EDPW1230” and press [Enter] key.
If “OK” is returned, the EDID write-protect is canceled.
[Connection diagram of PN-465U EDID writing tool]
DIP switch setting
ġ
Parallel (EDID) Serial (PROGRAM)
AUTO MANUAL
1502A T1620
1502A T1620
Left, right, right, right with the parallel connector on the
upper side.
PN-465U body rear
ġ
VGA input
terminal
Connect to USB
port of PC
Connect to printer port of PC
ġ
VGA connector
VGA
USB
ġ
Serial connector
ġ
Parallel connector
ġ
USB cable
ġ
No need to connect
the serial cable.
DVI-D connector
DVI terminal
(IN)
DVI-D cable
SW1 :
SW2 :
SW3 :
SW4 :
Jig PWB (X1049MP-27)