10
E
The USB cable on the back of the tray can be fastened with the cable clamp to the rear of the monitor.
*1*1
*1 *1
*1
*2 *2
*1
*2
n
Removing the Tray
Pinch the locking tabs (4 places)(1)
Back of the tray
(2)
n
Attaching the speaker covers
Speaker cover attachment screws (M3)
If you will use the monitor in a portrait orientation, the speaker cover is not used.
n
Removing the tray mount tting
If you will use the monitor in a portrait orientation or will otherwise not use the tray, remove the tray mount tting.
To Next Page
Loading...
Need help?
General
