Sharp PN-S525 - Connecting the Power Cord; Mounting the Temporary Stands

12
E
Connecting the Power Cord
Caution
• Donotuseapowercordotherthantheonesuppliedwith
the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the AC power outlet.
AC input terminal
1
Main power switch
For power
outlet
Power cord (Supplied)
2
3
Caution
• Themonitorisheavy.Makesuretohandlethemonitorwith
at least 2 people.
• Pleasenotethatthetemporarystandsarefortemporary
use only until the monitor is properly mounted.
The temporary stand can be mounted at a position shown in
the illustration.
Remove the screws from the monitor and mount the
temporary stand using the screws.
Temporary stand
Screws
Caution
• Afterdetachingthetemporarystand,besuretore-mount
the removed screws on the monitor.
Mounting the Temporary Stands