Sharp QT-CD161 User Manual

QT-CD161/141
– 28 –
44* P14/SWG28 N.C No connect.
45* P13/SEG27 N.C No connect.
46* P12/SEG26 N.C No connect.
47* P11/SEG25 N.C No connect.
48 P10/SEG24 N.C No connect.
49 P07/SEG23 N.C No connect.
50 P06/SEG22 N.C No connect.
51 P05/SEG21 N.C No connect.
52 P04/SEG20 N.C No connect.
53 P03/SEG19 N.C No connect.
54* P02/SEG18 N.C No connect.
55 P01/SEG17 N.C No connect.
56 P00/SEG16 SEG16 Output LCD segment output.
57 P37/SEG15 SEG15 Output LCD segment output.
58 P36/SEG14 SEG14 Output LCD segment output.
59 P35/SEG13 SEG13 Output LCD segment output.
60 P34/SEG12 SEG12 Output LCD segment output.
61 SEG11 SEG11 Output LCD segment output.
62 SEG10 SEG10 Output LCD segment output.
63 SEG9 SEG9 Output LCD segment output.
64 SEG8 SEG8 Output LCD segment output.
65 SEG7 SEG7 Output LCD segment output.
66 SEG6 SEG6 Output LCD segment output.
67 SEG5 SEG5 Output LCD segment output.
68 SEG4 SEG4 Output LCD segment output.
69 SEG3 SEG3 Output LCD segment output.
70 SEG2 SEG2 Output LCD segment output.
71 SEG1 SEG1 Output LCD segment output.
72 SEG0 SEG0 Output LCD segment output.
73 VCC VCC Microcomputer power +5V.
74 VREF VREF A/D converter power +5V.
75 AVSS AVSS A/D converter power GND.
76 COM3 COM3 Output LCD common output terminal.
77 COM2 COM2 Output LCD common output terminal.
78 COM1 COM1 Output LCD common output terminal.
76 COM0 COM0 Output LCD common output terminal.
80 VL3 VL3 Input LCD bias setting power input terminal.
IC501 RH-iX0016SJZZ (IX0016SJ): CD/Tuner Control Microcomputer (2/2)
Port Name Function
Terminal
Name
Pin No.
Input/
Output
In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.

Sharp QT-CD161 Specifications

General

Brand	Sharp
Model	QT-CD161
Category	Stereo System
Language	English