7
Example:
To cook for 2 minutes and 30 seconds on P80 (80%) microwave power.
1. Press the
MICRO. POWER
button. P100 will be
displayed.
2. Rotate the ENTRY dial
to select the power
level for P80.
3. Press the START/
+30sec./ENTER button
to con rm the setting.
4. Enter the cooking time
by rotating the ENTRY
dial.
5. Press the START/
+30sec./ENTER button
to start cooking. (The
display will count
down through the
programmed cooking
time.)
NOTE:
• When the oven starts, the oven lamp will illuminate and the turntable will rotate
clockwise or anticlockwise.
• If the door is opened during cooking/defrosting to stir or turn over food, the
cooking time on the display will stop automatically. Cooking/defrosting time
cally. The
starts to count down again when the door is closed and the START/ +30sec./
button is pressed.
• When cooking/defrosting is complete, the time of day will reappear on the
display, if the clock has been set.
• If you wish to know the power level during cooking, press the MICRO. POWER
button. The current power level will displayed for 3 seconds.
The AUTO MENU programmes automatically calculates the correct cooking mode and cooking time of foods
the example below for guidance on how to operate this function.
Example: To cook sh with a weight of 250g by using the AUTO MENU function.
1. Rotate the ENTRY dial to
select the desired auto menu.
2. Press the START/ +30sec./
ENTER button to con rm the
setting.
3. Enter the desired weight by
rotating the ENTRY dial.
4. Press the START/ +30sec./
ENTER button to start cooking.
(The display will count down
through the programmed
cooking time.)
NOTES:
• The weight or quantity of the food can be input by rotating the
ENTRY
dial until the desired weight/quantity (’g’ or ml) illuminates on the
display. Enter the weight of the food only. Do not include the weight of
the container.
• For food weighing more or less than the weights/quantities given in the
AUTO MENU chart cook by manual operation.
Follow
ENTER
AUTO MENU FUNCTION
MICROWAVE COOKING
To Next Page
Loading...
