I
SF-7300
SF-7350
Must be algned tothe frontframe side
Use
acliptoavoidcontact
withthe
mainbody.
edge.
(6)
(n
(8)
Ckan the main coronatire, end inatetithe mdn corona unti
inthe drumunit.
Do not installthe transfercoronaunitor ttredevdoper urr~ at
thistime.
Cbee the dam ehdl.
Turn on the cabinetswitchwiththe coronackener.
Feed the ND harness throughthe dev- unit moun~
slot,
andconned the teat leads W the bhck c@ to a gti
chassisground.
G//
(9) Cormectthe MD teat leads to the meterad the DCD sheet.
(4)
Installthe DCD instal~ dmm on the drumunit.
Conti
theharness.
(~ Installthe drum unitinthecopierwith the cabk etierrdi~ out
of the dev~ unit rneetion sbt and that the etie
sheet podorr A insf~rrmerrtwiththe DV guide mybr sheet.
lMPORTAf4T: Make sure that the Mack teat bed is CO*
nestedto a goodchassisground.
When the d~ muftimeteris used,con~
the teat hda as fdtis:
Redcf@totherregatieje~ ofthemeter.
Blue c@ to the poahe jack ofthe meter.
And set the meter mnge as fdbws:
K*1 to DOmArange.
KW2 to 0.2.
Wfrenthe ammeter is usd, connecttie ted
leads asfdbws:
4,
1
Red clip to the negative jack of the am-
meter.
Blue clipto the positivejack ofthe amm~~
7–2
To Next Page
Loading...
