I
SF-7~
SF-73m
.
a.
b.
:.
Lower’railguide
Drivewires
1
Installingdrivewires to the -y lamp unit
Pla- bothfront and rear frame side drive wires ontothe dits d
ths wire hoMingbradet.
.
Removethe paper retry S* frame ~tiion plate.
Frame mnndon pfate
\
?
Move the c~y lamp unit and the ~ mirrorbase towards
the
. .
PaP$rMW side at & same time. Al@nthe oopylamp unitend
tb ~ mirrorbase tad with the stopperson both frame sides,
thentightenthe =rews of the wire hoMirrgangbs.
stopper
Cqy lamp unit
w
>,
——
Copy lamp unitstopper
C. Mirror base drive wire
(Removing the wire)
(1) Remove the pends (rear side, paper exit side and oparakm
a~.
(2) Remove thetabkgbss.
(3) Removethe psperexit sideframecontiion @ate.
(4) Remove the c~y lamp unit and the sopy lamp bd guide,
rder to &(2) to (~.
(~ Loosen the nut of the mirrorbase wire tension springon the
side tobe r@aoed. Rotatethe tension*few ~unterc~wise
to ease tenswn.
c3\~>
Wire tensionsaew
FL
\/
Nut
-/
Mirrorbaeedtie wire
(6) RernovethecMch unitand the HV unit,referto [13}B ~ C.
(~ Remove tie reerfreme ~tiauppuby shaft26Tgeer (stop
pin).
Stoppin
\
(Rear frame stie)
8–2
To Next Page
Loading...
