1
SF-73m
SF-7350
Teat command
Function
*
Mdel
Parameter
(Localmodenumber)
Versbn Remak
SF7350
Inch*ries
07
E-
AB series
04
Japan Japan orexportversionmust
06
be set forthe AS setis.
SF-7300
Inch
%tiS
03
00
AB sStiS
Japan
Japan or exportversionmust
02
be settortheA%sa+s.
90 Used to set the drumcleani~ mode. me durationof the main
motorrun time after the com~etion of copyoperation,
whichehouMrrormal~be settothe 10-secondmode.
1) If the ready lampis activeuponenteri~ thistest command,the machineis in the 60-secondmode. Ifnotache, k
is
in the 10-s800rrdrode.
2) Each timethe paper sebct key isdepr=sed, the readylamp altematdy turnson ati off. If the PSW was deproased
when the ready kmp is off,b mode is setto the 10-secondmode.
97
Used to sdect whetherthe manualcopymode is statied automatkdfy orbypuahi~ the PSW.
Methd:
1) When thistest commandis executed, the currenttystored manual copy mode parameter (see tabk bebw) is dis-
phyed andthe ready hmp turnson.
2) After the ready lamp turnson, enter the parameter usi~ a ~re Oor 1 for the modeto be set. Depressthe PSW
and the parameteris then storedinthe memoryand the reedylamp ~ out.
Parameter Manual copymode
● lnvdM when the mul~bypass stacker is
o
Autostartmode
insfaffad.(Copystartsafterdepressionof
1
the PSW, when the multi~aaa stacker
PSW startmode
t
is inetdfed.)
98
Used to setthe tonermotoroparati~ fr~uency.
Metiod:
1) When this teat commandis executed,the contentsof the currentiyset toner motord~e fr~uancy parameter(see
tabk bebw) isdisplayedand the ready lampturnson.
2) Enter the parameter appropriateto the toner motor drive frquency uai~
a key between O and 2 and push the
PSW. me numberis storedinthe memoryand the ready lamp~ea out.
Parameter Toner motordtie fr~uency
o 50Hz
1
More tonersupprd
1
55.5HZ
2
62.5Hz
Use thisteat commandtocha~e the tonersupp~ rate (normallyset
toO).
)
.
..-—-——-. .-
-------
To Next Page
Loading...
