SJXF50XT
14
MODE FOR DISPLAY2.
How to set the product in this mode2-1.
Open the doors of the refrigerator compartment and the ice compartment within 2 minutes after turning ON the •
power to the main unit, and press and hold the [
冷凍
] button for 5 seconds or longer.
How to cancel this mode2-2.
With the doors of the refrigerator compartment and the ice compartment opened, press and hold the [•
冷凍
]
button for 5 seconds or longer.
Even if the main power supply is turned OFF, the display mode will be maintained. (not be cancelled)
Operation in the display mode2-3.
Each load (compressor, each fan motor, all heaters, damper, ice release motor, water pump motor) stops.1)
The damper is normally kept opened.2)
Even if the ice compartment or the freezer compartment (lower) door is opened, the door-open buzzer does 3)
not sound.
When the refrigerator compartment door is opened:4)
The refrigerator compartment illumination lamp and indicator LED are lit.•
The cooling/refrigerator compartment PCI fan motor operates.•
The door-open buzzer does not sound.•
Operation panel5)
<Inside of compartment>
The temperature control lamps (five lamps) will blink in sequence one by one.•
If the operation panel button is operated, ordinary operation is executed until the refrigerator compartment door •
is closed.
Note: For indication only. Each mode operation is not executed.
<Outside of compartment>
The operation panel lamps on the door will blink in sequence one by one.•
To Next Page
Loading...
