SJXF50XT
27
REFRIGERATOR COMPARTMENT DISASSEMBLY2.
Main component Contained parts
RC box ass'y Gear pump, R-thermistor, damper
Pipe cover -
R-shower duct ass'y Catalyzer
D-PCI box ass'y Plasmacluster unit, indicator PWB, D-fan motor PCI, Motor, O catalyzer
Remove the accessories (shelf, chilled case, etc.).1.
Remove the chilled shelf stopper.2.
Raise the back of the shelf slightly from the bottom,
and pull it to the front.
Chilled shelf stopper
C case cover
How to remove C case cover1)
C-shelf ass’y (back side)
C case cover
(C-shelf ass'y with the C case cover attached)
Unhook three claws at the back and pull out the
protrusions in front.
Claws at the back
: Protrusion
C case cover
Installation is the reverse procedure to removal.•
How to remove chilled lock2)
Unhook two claws (if they are tight and stuck, insert
a thin flathead screwdriver (or a steel scale) to
unlatch them) and open the cover.
Remove one screw.
Claws
Chilled lock
Screw
Remove partition support l and partition stay.3.
Pull it while holding it up slightly.
Partition support l
Partition stay
Remove duct RT rivet, and remove duct RT cover.4.
Pull it downward to raise it. (If it is stuck, insert a
fl athead screwdriver to raise it.)
Duct RT cover
Duct RT rivet
To Next Page
Loading...
