SJXF50XT
29
Cut A-Sealer R-C box insu A along the joint of R-C 2)
box insu A/B (dotted line).
R-C box insu A
R-C box insu B
Damper
A-sealer
Remove 3) the damper.
Pull out the pipe cover.10.
□ : claw
Pipe cover
FREEZER COMPARTMENT /ICE COMPARTMENT DISASSEMBLY3.
Main component Contained parts
Ice maker ass'y T-SK Ice maker thermistor, Ice maker ass'y, Ice cube heater, I-grill, Ice sensor, Ice cube maker
C-part. FI-FK Proximity switch
EV cover ass'y F-thermistor, DEF thermistor, Fan motor F, Duct heater
Heater -
DEF thermistor holder ass'y
(In vicinity of evaporator)
Thermo. fuse ass'y, DEF2 thermistor
Remove the accessories (cases and shelves of 1.
freezer compartment and vegetable compartment).
Remove the SW cover. •
(When replacement of F-LED PWB ass’y)
SW cover
Remove the Ice maker ass'y T-SK.2.
Remove the screw and pull it toward you while 1)
pressing the claw on the front.
Remove connector.2)
Flathead screwdriver etc.
Ice meker ass'y T-S
Screw
CAUTION: Precautions for handling the ice maker ass'y T-SK
Securely insert the 4 claws. If the claws are not •
inserted completely and they come loose,the ice
maker ass'y T-SK could fall down during ice cube
release or it could sag down and make contact with
the ice storage box.
When connecting the connectors, make sure there •
are no connector insertion problems.
Remove the C-part. FI-B.3.
Remove the screw, and pushing the C-part. from
the left side to release the claw at the front.
Screw
C-part. FI-B
Claw
To Next Page
Loading...
