SJXF50XT
32
How to install Damper cover
Drive in the Damper cover after fi tting claws at two places while running through the slit under left.•
Attach one screw.•
Damper cover
: claw
HOW TO REMOVE OP. PWB ASS'Y5.
Remove the PWB cover.1.
Insert a thin flathead screwdriver (or a steel scale) into the slot at the lower side of the PWB cover to unhook
the claws.
: claw
PWB cover
Remove the panel cover.2.
Insert a thin flathead screwdriver (or a steel scale) into the slot at the upper side of the panel cover to unhook
the claws.
: slot
Panel cover
To Next Page
Loading...
