SJXF50XT
37
Attach the A-sealer EV. cover B to the harness of duct heater.2.
Duct heater
EV-insulation B
A-sealer EV. cover B
Attachment side
of heater
EV-insulation B
Duct heater
Put it on so that there is no space
between the sealer and the insulation.
A
A
Cross-sectional view A-A
Wrapping the
A-sealer EV. cover B
Attachment of the EV-insulation A and B. 3.
• Fasten these parts with paper tape.
EV-insulation A
EV-insulation B
EV-insulation A
Left side Back sideRight sideFront side
Paper tape
EV-insulation B
Paper tape
EV-insulation A
Paper tape
Apply A-sealer EV. cover B
so that there is
no clearance between
EV-insulation A and B.
Seal the paper tape so that there is no space between EV-insulation A and B.
To Next Page
Loading...
