Sharp SJ-XF50X-T - Page 39

SJXF50XT
39
Mounting the fan louver5.
• Mount the DEF-thermistor, and fasten the harness of the fan motor F and the DEF-thermistor with the L-band C.
• Wind the EV. cover sealer N on the lead wire of the DEF-thermistor and the fan motor F.
• Apply the EV. cover AL.
• Mount the fan louvers to the front, and fasten them with two screws.
• Attach the A-sealer EV. covers C, D and E as shown in the fi gure.
• Insert the pins into the connectors.
Ａ-sealer EV. cover D
Ａ-sealer EV. cover C
EV.cover sealer N
Putting around
the harness
Ａ-sealer EV. cover C
Ａ-sealer EV. cover
Fan louver
EV.cover
Ａ-sealer EV. cover
Ａ-sealer EV. cover E
Fan motor F-K
EV.cover
DEF-thermistor
Ａ-sealer EV. cover E
EV. cover AL
EV.cover
F-thermistor
EV-insulation B
Fan louver
EV.cover
Ａ-sealer EV. cover E
Ａ-sealer EV. cover
Fan louver
Paste A-sealer EV. cover across
insulation and molded component.
EV.cover
Fan motor F-K
Fan louver
Screw unnecessary
Screw unnecessary
L-band C
Connector pin insertion specifications
Blue
Blue
White
White
Insert the lead wire
to the connector.
Nos. 1, 2 and 3 connector pins
are already inserted.
Fan motor F connector
DEF-thermistor lead wire
F-thermistor lead wire
Insert the lead wire
to the connector.