E 15
Mode
This feature allows you to select TV, VCR, SKIP. First follow
the above steps 1, 2, and 3. The TUNE menu will appear on
screen.
1. Press CH DOWN to select MODE.
2. Press Volume UP to select:
TV: If the TV signal is weak the image can move.
In this case set the MODE to TV.
VCR: The upper part of the picture may be
distorted when receiving signal from a VCR
via RF terminal on the TV set.
In this case, set the MODE to VCR.
SKIP: Allows you to skip channels you do not want
to view when using CH UP/DOWN.
3. Press GREEN to memorize.
4. Press MENU to clear the on-screen display.
Repeat the above procedure for other programme channels
as required.
EDIT
This feature allows you to give a name to the channels and
change the name.
1. Select EDIT and then press MENU. The EDIT menu
will appear.
2. For the details on the procedure, refer to page 10.
To Next Page
Loading...
