E 16
TV Operation
Channel Selection
CH UP/DOWN
Select the programme channel number you want to see,
using the CH UP/DOWN buttons .
You can clear the on-screen display by pressing MENU.
The channels that are in SKIP mode cannot be
seen when using this method.
Use the 0 ~ 9 NUMBER buttons to display these
channels.
SINGLE/DOUBLE entry
This button selects between one or two digit channel
number entry.
0~9 NUMBER buttons
You can select channels by pressing the 0 ~ 9 NUMBER
buttons on the remote control.
For single and double digit entry see above.
FLASH BACK
Press this button to switch the currently viewed channel to
the previously viewed channel, and vice versa.
This function is only available in programme channel
selection mode.
I.e. not when AV terminals are in use.
To Next Page
Loading...
