Sharp SX66NF8 - Connections

E 36
Connections
Connecting to video equipment
Enjoy playback from a video disc player, VCR or other video equipment by connecting
them to this TV set using the Audio/Video in terminals.
Example use of front terminals
TV
(SX66NF8)
(SX66NF8) (SX76NF8)
VCR
Video Game
Camcorder
Behind the door
To S-Video
out terminals
To Audio/Video
out terminals
ONTIMER
ONTIMER
AV-3 IN
To Audio/
Video in
terminals
To Audio/
Video out
terminals
To Audio/
Video out
terminals
(SX76NF8)
For Playback
For Recording and Editing
VIDEO
AUDIO
OUT AV-1 IN AV-2 IN
Y
P
B
(C B )
P
R
(C R )
COMPONENT
L
R
VIDEO
AUDIO
(MONO)
OUT AV-1 IN AV-2 IN
Y
PB
(CB)
P
R
(CR)
COMPONENT
L
R
TV
VCR
VCR
DVD Player
To
Component
terminals
• Turn off the power on the TV set and the VCR being connected before making the above connections. Be sure the cord
plugs are fully inserted in the connection terminals.
• For playback of monaural audio, connect the external source to the audio input left terminal on the front or rear of the TV
set (MONO) to hear the same sound from both speakers.
• The audiovisual cords required to connect the TV set with video equipment may differ from those shown in the above
diagram. See the operation manual of your video equipment for connection details.
• The above recording and editing connections are for intended solely for personal use and not for the illegal copying of
audiovisual material protected by copyright laws.
Example use of rear terminals
Yellow: To video input jack
White: To audio input (L) jack
Red: To audio input (R) jack
Green: To Y input jack
Blue: To P
B (CB) input jack
Red: To P
R (CR) input jack
SX66/76NF8(01-)new 02.10.22, 4:05 PM36