E-14
Back Panel
HUMIDIFYING TRAY AND COVER
CAUTION
Rinse the inside of the Humidifying Tray with a
toothbrush.
• Do not remove the Float and the Roller.
• If the Float and / or the Roller comes off . (Ref. E-18)
NOTE
for stubborn dirt...
TRAY
1.
Fill the tray half way with water.
2.
Add a small amount of kitchen
detergent.
3.
Soak for 30 minutes.
4.
Remove the kitchen detergent
with clean water.
BACK PANEL
NOTE
for stubborn dirt...
Gently remove dust with a vacuum cleaner
attachment or similar tool.
Roller
Float
1.
Soak in water with kitchen
detergent about 10 minutes.
DO NOT scrub the back panel
hard.
2.
Remove the kitchen detergent
with clean water.
3.
Dry fi lter completely in a well
ventilated area.
CAUTION
Sensor
CARE AND MAINTENANCE
To Next Page
Loading...
Need help?
General
