Reports/Batch Commands
Page / 30
Designs and specifications are subject to change without notice.
05/2002
1. Open Batch:
Place the SM or MGR key to the X1/Z1 position
1) Select 7 CAT
2) Select 1 CAT#2
3) Select 1 BATCH EXECUTE
4) Select 1 OPEN BATCH
5) Upon successful execution, the POS will return to the BATCH EXECUTE sub-menu.
6) To exit, depress the [CANCEL] key until the POS returns to the X1/Z1 menu.
1234
Note: If the Batch is already open then the message "BATCH ALREADY OPENED" will be printed.
[ Example Report]
YOUR RECEIPT
THANK YOU
0 9 / 0 1 / 2 0 0 1
#0145 9:30PM
* X 1 *
000001
OPEN BATCH #2 Name of Inquiry Report and Batch No.
To Next Page
Loading...
