Reports/Batch Commands
Page / 31
Designs and specifications are subject to change without notice.
05/2002
2. Close Batch:
Place the SM or MGR key to the X1/Z1 position
1) Select 7 CAT
2) Select 1 CAT#2
3) Select 1 BATCH EXECUTE
4) Select 2 CLOSE BATCH
5) Upon successful execution, the POS will return to the BATCH EXECUTE sub-menu.
6) To exit, depress the [CANCEL] key until the POS returns to the X1/Z1 menu.
1234
Note: If the Batch is already closed then the message "BATCH ALREADY CLOSED" will be printed.
X2/Z2
X1/Z1
MGR
REG
OP,X/Z
PGM1
OFF
PGM2
(SRV)
(SRV')
OP
SM
MA
SRV
X1/Z1
[ Example Report]
YOUR RECEIPT
THANK YOU
0 9 / 0 1 / 2 0 0 1
#0146 9:31PM
* X 1 *
000001
CLOSE BATCH
C1
12345678
Name of Inquiry Report and Batch No. (when applicable)
Status of Batch closing ("C" means successful)
Total Sales Amount and No. of Transactions
Batch No.
Network "Calling Code"
24.00 7
To Next Page
Loading...
