Sharp UP-600 - Page 34

Reports/Batch Commands
Page / 32
Designs and specifications are subject to change without notice.
05/2002
3. Clear Batch:
Place the SM or MGR key to the X1/Z1 position
1) Select 7 CAT
2) Select 1 CAT#2
3) Select 1 BATCH EXECUTE
4) Select 3 CLEAR BATCH
5) Upon successful execution, the POS will return to the BATCH EXECUTE sub-menu.
6) To exit, depress the [CANCEL] key until the POS returns to the X1/Z1 menu.
1234
Note: The above key entry will delete any resident totals in the Data Tran. This command is only used in case
of unresolved problems with Batch Closings.
X2/Z2
X1/Z1
MGR
REG
OP,X/Z
PGM1
OFF
PGM2
(SRV)
(SRV')
OP
SM
MA
SRV
X1/Z1
[ Example Report]
YOUR RECEIPT
THANK YOU
0 9 / 0 1 / 2 0 0 1
#0147 9:32PM
* X 1 *
000001
CLEAR BATCH Name of Inquiry Report