UP-810F/820N/820F(U) SRV MODE PROGRAMMING (“SETTING”)
3 – 3
DEVICE CONFIG - 6. REPORT PRINTER
DEVICE CONFIG - 7. VALIDATION (VP)
DEVICE CONFIG - 8. KP#1 - KP#9
DEVICE CONFIG - 9. CAT#1 / CAT#2 / PIN PAD
Details are omitted.
DISPLAY CONTENTS SELECT ITEM MRS NOTE
TERMINAL# Terminal No. 000 - 254 000 000 : Self terminal No.
This means local device.
1-254: Except self terminal No.
This means re-routed device.
Re-routing programming is only valid for remote
printer.
CHANNEL# Channel No. 0 - 4 0 0: No RS-232 channel is assigned.
PRINTER Kind of printer BUILT-IN BUILT-IN The printing method is according to “BUILT-IN
PRINTER” programming.
TM-T88 (3) /
T88 (4)
TM-U220/U230
TM-T90
AUTO CUTTER Auto cutter YES YES
NO
LOGO TEXT Logo Text Print NOT PRINT PRINT
PRINT
DISPLAY CONTENTS SELECT ITEM MRS NOTE
TERMINAL# Terminal No. 000 - 254 000 000 : Self terminal No.
This means local device.
1-254: Except self terminal No.
This means re-routed device.
Re-routing programming is only valid for remote
printer.
CHANNEL# Channel No. 0 - 4 0 0: No RS-232 channel is assigned.
PRINTER Kind of printer TM-295
(EPSON)
TM-295
(EPSON)
VP TIMES No. of times of Validation print 0 - 9 1 This item is valid only for TM-295.
DISPLAY CONTENTS SELECT ITEM MRS NOTE
TERMINAL# Terminal No. 000 - 254 000 000 : Self terminal No.
This means local device.
1-254: Except self terminal No.
This means re-routed device.
Re-routing programming is only valid for remote
printer.
CHANNEL# Channel No. 0 - 4 0 0: No RS-232 channel is assigned.
PRINTER Kind of printer BUILT-IN TM-T88 (3)/
T88 (4)
TM-T88 (3)/
T88 (4)
TM-U220/230
TM-T90
AUTO CUTTER Auto cutter YES NO
NO
LOGO TEXT Logo text Print NOT PRINT NOT PRINT LOGO TEXT and its format is same as RE-
CEIPT. If a printer is set as “TM-T88 (3) / 88 (4)”,
its STAMP can be printed.
PRINT
TOP EXTRA LINE Top line feed 0 - 9 0
BOTTOM EXTRA LINE Bottom line feed 0 - 9 0
To Next Page
Loading...
