UP-810F/820N/820F(U) SRV MODE PROGRAMMING (“SETTING”)
3 – 13
919-C: 1. PB entry
2. Amount printing when PLU unit price is zero
919-D: 1. Conversion SBTL printing of native SBTL
2. Foreign currency format
[JOB#920] : MRS=2040
920-A: 1. Back-up master function
920-B: 1. System report and down-load job is executed in the back-up
master.
920-C: 1. Automatic download machines in an inline system at UPC
(EAN) programming and UPC (EAN) delete.
2. PGM-mode programming at the satellite
920-D: 1. Status of the register
[JOB#921] : MRS=0000
921-A: 1. Convert UPC-E code to UPC-A code
921-B: 1. GLU system
921-C: 1. BILL printing method: The action after printing Bill.
921-D: 1. TIP PAID is automatically executed when TIP is remained at
Ind. Server Resetting.
[JOB#922]: MRS=0000
922-A: Not used (Fixed at “0”)
922-B: 1. Using new coin dispenser which can treat $1 coins
922-C, D: Not used (Fixed at “00”)
[JOB#923] : MRS=0010
923-A, B: 1. The record number for REQUEST of T-LOG POLLING
(x100) for satellite
Ex:
When input 10 to AB, the T-log records exceed 1, 000 records. By that
the satellite request T-LOG POLLING to master.
Note:
In case of 00, the satellite request T-LOG POLLING to master at each
transaction. but master dose not request T-LOG POLLING to MWS
(Manager Work Station).
920-C: 1. T-log function
1. PB entry
2. Amount printing
when PLU unit
price is zero
919-C Flat Normal
Non-compulsory
No 0 ★★
Yes 1
Compulsory
No 2
Yes 3
1. Conversion
SBTL printing of
native SBTL
2. Foreign cur-
rency format
919-D Flat Normal
Ye s
Not 0 ★★
Omit digits lower
than TAB position
1
No
Not 4
Omit digits lower
than TAB position
5
1. Back-up master function 920-A Flat Normal
Not exist 2 ★★
Exist 3
1. System report and down-load job is
executed in the back-up master.
920-B Flat Normal
Disable 0 ★★
Enable 4
1. Automatic down-
load machines in
an inline system
at UPC (EAN)
programming
and UPC (EAN)
delete.
2. PGM-mode pro-
gramming at the
satellite
920-C Flat Normal
Ye s
Disable 0
Enable 1
No
Disable 4 ★★
Enable 5
1. Status of the register 920-D Flat Normal
Stand-alone machine 0 ★★
Satellite 1
Master 2
Back up master 3
1. Convert UPC-E code to UPC-A code 921-A Flat Normal
No 0 ★★
Ye s 4
1. GLU system 921-B Flat Normal
Centralized 0 ★★
Individual 4
1. BILL printing method: The action after
printing Bill.
921-C Flat Normal
The item data is deleted and each bill con-
tinue to print in the previous bill.
0 ★★
The item data is not deleted and each bill
prints all item.
1
1. TIP PAID is automatically executed
when TIP is remained at Ind. Server
Resetting.
921-D Flat Normal
No 0 ★★
Ye s 4
1. Using new coin dispenser which can
treat $1 coins
922-B Flat Normal
Ye s 0 ★★
No 1
1. The record number for REQUEST of
T-LOG POLLING
(x100) for satellite
923-AB Flat Normal
0000 ~ 9900 00-99 00 00
1. T-log function 923-C Flat Normal
No 0
Ye s 1 ★★
To Next Page
Loading...
