UP-810F/820N/820F (U) SRV MODE PROGRAMMING (“SD CARD MODE”)
6 – 9
15.ERROR MESSAGE LIST
(O : Used, — : Not used)
No. Description MESSAGE DISPLAY PRINT
1 SD JOB Normal End SD FINAL — O
2 SD card is not found NO CARD O —
3 SD card memory is full CARD FULL O O
4 No file exist NO FILE O O
5 File access error (Write protect, or ) FILE FAILED O O
6 999 times limitation error (SALES, EJ, T-LOG) OVER LIMIT. O O
7 Operation was canceled by [CANCEL] key SD CANCELED O O
8 Power off was occurred during SD card access POWER OFF O O
9 Designated folder does not exist NO FOLDER O O
10 Model is invalid MODEL INVALID O O
11 Card Protect Error CARD PROTECT O O
12 SD CARD ERROR
(Error except above 2 - 11 ERROR was occurred)
(Folder can not be made)
(File close can not be executed)
(File can not be read)
(File can not be written)
(File can not be deleted)
(SD card memory can not be mounted)
(SD card memory can not be unmounted)
(SD job execution during ONLINE/MWS communication)
SD ERROR O O
To Next Page
Loading...
