UP-810F/820N/820F (U) SRV MODE PROGRAMMING (“DOWN LOAD”)
5 – 1
CHAPTER 5. SRV MODE PROGRAMMING (“DOWN LOAD”)
The preset data of master machine is downloaded in satellite machines.
After IRC SETUP, using this setting procedure, download the setting
data from the master.
DISPLAY: SRV mode screen
Select “4 DOWN LOAD” and press the ENTER key.
$
DISPLAY: DOWN LOAD item selection screen
[1 SRV PARAMETER]-[JOB#800]
SRV PARAMETER
Including the machine parameter relating to in-line operations.
(“#902”, “#920-d:TERMINAL”, and “#921-d:MACHINE LOCATION” are
not down-loaded.)
Mode secret code preset
Maintenance Restriction table
[2 FREE KEY]-[JOB#850]
FREE KEY LAYOUT
Home /Function Menu table
Key Name/Attribute table
SRV
1 READING
2 SETTING
3 IRC SET UP
4 DOWN LOAD
5 DIAGNOSTIC
PREV. NEXT
LIST
P DOWN
DOWN LOAD
1 SRV PARAMETER
2 FREE KEY
PREV. NEXT
LIST
P DOWN
To Next Page
Loading...
