64
-
Playback
Inserting a Video Cassette
Gently insert the video cassette into the cassette compartment. The VCR turns on automatically. If the cassette
is inserted incorrectly, the loading system will not function. Do not force the cassette into the VCR. When the
cassette has been properly loaded,
“=I’
appears on the VCR display.
To remove the cassette, press EJECT during stop mode.
Playback
PREPARATION
*Turn on your TV and select the video channel
Insert a cassette.
PLAY/x2
REW
STOP
FF
0
Turn on the VCR. (See page 5, item 3.)
Q
Insert a cassette.
@ To stop playback, press STOP. (If the tape
0
Press
PLAY/XP.
(The auto tracking control system
reaches its end, the VCR will automatically rewind
the tape to the beginning, eject the cassette, and
engages and
”
,”
flashes on the TV screen for a
turn into POWER STANDBY mode.)
few seconds.)
Video Search
Use the following procedure to quickly find the section you
want, while viewing the picture.
0
During playback, press FF for forward video search, or
REW for reverse search.
There are 2 search speeds in each direction. The VCR
switches between them each time the button is pressed.
0
Press PLAY/X2 to resume normal playback.
Fast Forwarding and Rewinding
0
To move through the cassette faster, press
STOP and then press FF or REW to fast
forward or rewind the cassette. (The picture
cannot be viewed in this mode.)
@ Press STOP to stop fast forward or rewind.
l
If you use other than
E-90/E-180
cassettes, fast for-
ward and rewind may take somewhat
longer.
16
To Next Page
