Editing from a Camcorder to Your VCR
Editing from your Camcorder is extremely easy using your VCR with a linear tape counter, etc. The connection
diagram below is for a guideline only. Refer to your Camcorder Operation Manual for precise connection
information
amcorder
(VIEWCAM
t Position AV
H
Specifications
Format: VHS PAL standard
Video recording system: Two rotary heads, helical scan
Video signal system: PAL colour or monochrome signals: 625 lines
240 min. with E-240 video cassette
Tape width: 12.7 mm
Tape speed: 23.39 mmisec. SP
Antenna: 75 Ohm unbalanced
Reception channels: VHF channel 0 to 12, UHF channel 28 to 69
RF output signal: UHF channel 28 to 69 (preset to 37)
Power requirement: AC 240 V, 50 Hz
Power consumption: 16 w
(approx.)/l
.O
w Max (at Low Power Mode)
Operating temperature: 5°C to 40°C
Storage temperature:
-
20°C to 55°C
Video input: 1
.O
Vp-p, 75 Ohm
output:
1
.O
Vp-p, 75 Ohm
Audio input: (phono type) Line:
-8dBs,
47 kohm
output: (phono type) Line: -8dBs (approx.), 1 kohm
Dimensions: 360 (W) x 288.5 (D) x 93 (H) mm
Weight: 3.2 kg (approx.)
Supplied accessories: R6 (AA,
UMISUM-3)
battery x 2
75-ohm
coaxial cable, operation manual, remote control unit
Design and specifications are subject to change without notice.
30
To Next Page
Loading...
