Sharp VC-MH713HM

11
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
HOW TO PLAYBACK A VIDEO TAPE
FAST FORWARDING/REWINDING A VIDEO TAPE
1.
Press
STOP
to stop the video tape.
2.
Press the
FAST FORWARD
/
REWIND
buttons on the remote control or turn
the shuttle ring on the VCR fully to the Right for Fast Forward and fully to the Left for Rewind
and Release .
3.
To stop fast forward/rewind, press
STOP
.
FORWARD/REVERSE VISUAL SEARCH
1.
During playback to select search mode, press the FAST FORWARD /
REWIND
buttons on the remote control, or turn the shuttle ring fully to the Right for
Forward Visual Search or fully to the Left for Reverse Visual Search then Release . (On
release the shuttle returns back to starting position). Press the
PLAY/X2
button to
resume playback.
OR
2.
To decrease the speed, during visual search mode press
FAST FORWARD
/
REWIND
again, or turn and hold the shuttle ring halfway to the Right for Forward
Visual Search or Left for Reverse Visual Search . Release the shuttle to resume playback or
if the remote control was used press the
PLAY/X2
button.
NOTE:
• There will be picture interference and possibly a change to black and white picture
using Visual Fast Forward/Rewind functions.
STOP
FF
REW
STOP
FF
REW
PLAY / X2
FF
REW
PLAY / X2
REC
PAUSE/STILL
REW FF
PLAY / X2
STOP
Remote Control
Module 04E.fm Page 11 Tuesday, May 9, 2000 4:25 PM