6
If problems persist contact the SHARP Helpline on tel: 0990-274277
INSTALLING YOUR VCR
AUTO INSTALLATION
This model automatically tunes the TV channels in your area.
Turn the TV on and select the video channel. (As previously explained).
1.
Press
STOP
to switch on
the VCR.
2.
Follow the instructions that appear
on the TV screen by pressing the
button. (Auto tune may take a
few minutes)
NOTE:
• If the AUTO INSTALLATION screen doesn’t appear when you switch on your VCR or you
wish to reset your VCR and start the installation again, refer to
VCR RESET
at the back
of the book.
STOP
STOP
SET
SET
PLEASE BE SURE THE
AER I AL / SCART CABLE I S
CONNECTED TO YOUR VCR .
PRESS SET TO CONT I NUE
SET : ENTER MENU : EX I T
AUTO I NSTALLAT I ON
PRESS SET KEY TO START
SET : ENTER MENU : EX I T
Press the button.
SET
1CH22
AUTOMAT I C TUN I NG .
PLEASE WA I T .
MENU:EXIT
See next page to continue
Button positions for your reference.
REMOTE CONTROL
Press the button.
SET
Module 03G.fm Page 6 Tuesday, May 9, 2000 4:22 PM
To Next Page
Loading...
