30
If problems persist contact the SHARP Helpline on tel: 0990-274277
MORE INFORMATION ABOUT YOUR VCR
VCR DIGITAL DISPLAY
NOTE:
SELECTING THE OUTPUT FROM THE VCR
If your VCR is connected to your TV with a scart lead, when you start to play a video tape the
VCR will automatically switch its output so that playback picture is shown on the TV.
In this case ‘VCR’ will appear on the VCR display.
You can manually override this by pressing the
[TV/VCR]
button on the remote
control. Now the TV broadcast channel will be seen on the TV screen and ‘VCR’ will disappear
from the VCR display.
• Pressing the
[TV/VCR]
button again will return the TV picture to the playback
picture.
• Some models do not have all the features shown, therefore, they will not appear on the
display.
1. TIMER indicator.
2. AUDIO OUTPUT indicators.
3. RECORDING indicator.
4. CHILD LOCK indicator.
5. AM/PM indicators.
6. STOP indicator.
7. VCR mode indicator.
8. PRESET CHANNEL indicator.
9. VIDEO PROGRAMMING
SYSTEM/PROGRAMME
DELIVERY CONTROL indicator.
10. LONG PLAY indicator.
11. STANDARD PLAY indicator.
12. VIDEO TAPE indicator.
13. DECODER indicator.
TV/VCR
TV/VCR
Module 19B.fm Page 30 Monday, May 8, 2000 3:25 PM
To Next Page
Loading...
