22
If problems persist contact the SHARP Helpline on tel: 0990-274277
ADVANCED OPERATION
BLUE MUTE
The TV screen will be blue if a TV channel with no signal is selected, an unrecorded section of
tape is played or the quality of the recording on the tape is poor. Select OFF to disable this
feature.
1. Press the MENU button to display the
main menu on the screen.
2. Press the [ / ] menu select buttons to
select MODE.
3. Press the SET button.
4. Press the [ / ] menu select buttons to
select BLUE MUTE.
5. Press [/] to select OFF.
6. Press SET and then MENU to return
to the normal screen.
COLOUR
If the VCR is playing poor quality recording, the picture may turn black and white. Selecting
PAL may improve this (depending on the recording), although coloured speckles may
appear on black and white recordings.
1. Follow steps 1 to 3 from BLUE MUTE.
2. Press the [ / ] menu select buttons to select COLOUR.
3. Press [/] to select AUTO/PAL.
4. Press SET and then MENU to to return to the normal screen.
MODE MENU SCREEN
NICAM AUTO OFF
COLOUR AUTO PAL
BLUE MUTE AUTO OFF
REPEAT ON OFF
SET
MENU SET
CLEAR
PLUSCODE
MODE OSD
231
SET
SET
Remote Control
VC-MH713HM.book Page 22 Monday, May 8, 2000 11:53 AM
To Next Page
Loading...
