Inserting a Mini DV Cassette
Attach the power source to the
camcorder, then slide the cassette
compartment door release and open the
cassette compartment door.
Inserting a SmartMedia Card
1 Make sure that the power switch is set to
OFF.
2 Open the LCD monitor.
Card slot cover
2
3
Insert the cassette fully with the window
facing outwards, and with the erasure
protect tab facing upwards.
Press the _ mark gently until the
cassette holder clicks into place. Close
the compartment door by pressing the
center until it clicks into place.
mark
3
4
Open the card slot cover in the direction
of arrow.
Insert a SmartMedia card into the slot
as shown below, and push it in as far as
it will go.
5 Close the card slot cover.
vi
To Next Page
Loading...
