Card Recording
1 Make sure that a SmartMedia card is
inserted.
2
3
Remove the lens cap, and lift up the
viewfinder.
Set the Media Selection
switch to CARD.
4 Hold down the Lock button
and set the Power switch to
CAMERA.
5
Lock button
Press the STILL button to begin
recording.
AUTO 10/90
Card Playback
Press the LCD monitor OPEN release
button (_), and open the LCD monitor
to a 90 ° angle to the camcorder body
(®).
LCD monitor OPEN
release button
90°
2
Adjust the LCD monitor to an angle that
allows easy viewing on the on-screen
picture.
3 Set the Media Selection I
switch to CARD.
4 Hold down the Lock button
and set the Power switch to
VCR.
5
Lock button
Press _ or _,_ on the Operation button
to move the selection frame to the
desired image.
Selection Frame
6 Press I- / II.
viii
To Next Page
Loading...
