Preparation
14
Preparation
4 Press m or l to select “EXECUTE”,
then press the centre of the Operation
button.
5 Press the centre of the Operation
button.
6 Press m or l to select “2” (day),
then press the centre of the Operation
button.
7 Press m or l to select “6” (month),
then press the centre of the Operation
button.
8 Press m or l to select “2004” (year),
then press the centre of the Operation
button.
9 Press m or l to select “10” (hour),
then press the centre of the Operation
button.
Setting the Date and
Time
Available modes:
Tape Camera, Card Camera
Example: Setting the date to 2 June 2004
(2. 6. 2004) and the time to 10:30 am
(10:30).
Note:
• Before performing the steps below, make
sure that the CR1216 type lithium battery has
been installed (see page 12).
• The example screens shown are for Tape
Camera mode.
1 Hold down the Lock
button and set the
Power switch to v.
2 Press the DISPLAY button until the
mode screen appears.
3 Press l or m on the Operation
button to select “MENU”, then press
the centre of the Operation button.
BLC GA IN/ OFF
FADE
M
ENU
SCENE
M
ENU
EXECUTE
FADE
M
ENU
SCENE
M
ENU
BLC GA IN/
OTHERS 2
RETURN
T IME CODE OFF
OFFTC OUT
SETT I NG
12H 24H/
24H
.1120
000:
03.
2.
000
:
1 2003.
SETT ING
SETT ING
2.
000
:
6 2003.
SETT ING
2.
0 00
:
6 2004.
SETT ING
2.
01 00
:
6 2004.
DISPLAY button
Power switch
Operation button
Lock button
To Next Page
Loading...
