Sharp ViewcamZ VL-Z3H User Manual

77
Digital Still Camera Features
Delete protection indicator
PROTECT indicator
Delete Protection
Available mode:
Card Playback
You can prevent your important images
recorded on the card from accidental
erasure.
1 In Card Playback mode, press the
DISPLAY button until the mode
screen appears.
2 Press l or m on the Operation
button to select “PROTECT”, then
press the centre of the Operation
button.
3 Press l or m to select “EXECUTE”,
then press the centre of the Operation
button.
• The PROTECT indicator appears.
4 Press j, k,l or m to select the
image for delete protection.
5 Press the centre of the Operation
button to set delete protection.
• The R indicator appears.
• If you want to protect another image,
repeat steps 4 to 5.
6 Press the DISPLAY button to finish
the setting.
To cancel the protection
setting
1 Select the image for delete protection
cancellation in step 4 above.
2 Press the centre of the Operation
button to cancel the protection.
• The R indicator disappears.
3 Press the DISPLAY button to finish
the setting.
Note:
• Formatting a card erases all stored images,
including delete-protected images.
EXECUTE
M ENU
PROTECT
DELETE ALL
DELE TE ONE
1000 - 00
2/1PAGE
NORMA L
1
PROTECT
SET DISPLAY CANCEL:
][
1
4
2
5
3
6
3000 - 00
2/1PAGE
NORMA L
1
PROTECT
SET DISPLAY CANCEL:
][
1
4
2
5
3
6
3000 - 00
2/1PAGE
NORMA L
1
PROTECT
SET DISPLAY CANCEL:
][
1
4
2
5
3
6
3000 - 00
2/1PAGE
NORMA L
1
PROTECT
SET DISPLAY CANCEL:
][
1
4
2
5
3
6

Sharp ViewcamZ VL-Z3H Specifications

General

Brand	Sharp
Model	ViewcamZ VL-Z3H
Category	Camcorder
Language	English