33
Useful Features
Power Zoom
control
Digital zoom indicator
Useful Features
Camera Recording
5
Press l or m to select “DGTL
ZOOM”, then press the centre of the
Operation button.
6 Press l or m to select “40” or “500”,
then press the centre of the Operation
button.
7 Press the DISPLAY button to turn off
the menu screen.
The “D” digital zoom indicator is displayed
during digital zooming.
To use optical zoom only
Select “OFF” in step 6 above.
Setting the Digital
Zoom
Available mode:
Tape Camera
You can select three different zoom ranges:
1–10K (optical zoom), 10–40K (digital
zoom) or 10–500K (digital zoom). The
digital zoom allows you to record powerful
close-up pictures with the same operation
as normal zooming.
Notes:
• The digital zoom is in addition to the optical
zoom giving a combined maximum zoom
range of 1–500K.
• As the image is enlarged digitally, the
picture quality decreases when higher
digital zoom settings are used.
1 In Tape Camera mode, press the
DISPLAY button until the mode
screen appears.
2 Press l or m on the Operation
button to select “MENU”, then press
the centre of the Operation button.
3 Press l or m to select “EXECUTE”,
then press the centre of the Operation
button.
4 Press l or m to select T, then
press the centre of the Operation
button.
BLC GA IN/ OFF
FADE
M
ENU
SC ENE
M
ENU
SETT ING 1
QK.
DGTL
RE TURN
ZOOM
TAPE SPEED
RETURN
OF F
40
500
WT 52D
-
ZOOM
04
DGTL ZOOM
To Next Page
Loading...
