VL-PDl U
5. Withdraw the camera front cabinet, remove the screws ((c)LX-BZ0221TAFC)(2 PCS.) and the screw ((n)LX-
BZ0203TAFN)(one PC.), disconnect the two FPCs and remove the lens unit.
6. Remove the screws ((c)LX-BZ022lTAFC)(2 PCS.), disconnect the FPC of terminal unit and the microphone lead
connector.
7. Remove the power angle between the power FPC and the cabinet B.
Power
8. Remove the screws ((c)LX-BZ0221TAFC)(2 PCS.), disconnect the FPC, and remove the V/F unit.
4-2
To Next Page
Loading...
