Sharp VZ-1550E(BK) User Manual

VZ-1550H/E
CP-1550E
©
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT,
PLEASE REFER TO THE OPERATION MANUAL.
SPECIFICATIONS
GENERAL TUNER SECTION
Power source: 220 V, 50 Hz Frequency range: FM; 87.6 MHz — 108 MHz
(H MODEL) MW; 526.5 kHz — 1,606.5 kHz
Power source: 240 V, 50 Hz LW; 150 kHz — 285 kHz
(E MODEL) Usable sensitivity
Power consumption: 100 W (mono): FM; 3.2uV
Dimensions: Width; 365 mm (14-3/8”) (40 kHz deviation, S/N 26 dB)
Height; 288 mm (11-11/32”) MW; 500 nV/m
Depth; 380 mm (14-31/32’) (with bar antenna)
Weight: 6.2 kg (13.7 Ibs.) LW; 400 uV/m
(with bar antenna)
AMPLIFIER SECTION
Music power output: 2 x 25W/4 ohms, DIN 45 324 TURNTABLE SECTION
(H MODEL) Type: Microcomputer control, linear
Music power output: 2 x 25W/4 ohms, 10% T.H.D. tracking full auto
(E MODEL) Speed: 33-1/3 and 45 rpm
Continuous power output: 2x 12W/4 ohms, DIN 45 324 Motor: DC Motor (platter drive x 1,
(H MODEL) both channels driven tonearm drive x 1)
Continuous power output: 2 x 12W/4 ohms, 10% T.H.D. Tonearm: Dynamic balanced
(E MODEL) both channels driven Cartridge: Magnetic type
Input sensitivity and Replacement stylus: STY-141
input impedance: CD/AUX; 220 mV, 47 kohms
Loaded impedance: Speakers; 4 ohms
Headphones; 8—25 ohms
Type: 2-way
CASSETTE DECK SECTION Speaker: 16cm (6-1/2") woofer x 2
Type: 4-track, 2-channel stereo Srey (ea wearer tee
Input: 24 W
Tape: pee aey tape Rated impedance: 4 ohms
Bias and erasure system: AC 90 kHz (Deck 2 only) Dimensions: Width; 180 mm (7-18/32")
Tape speed: 4.8 cm/sec. (1-7/8 ips.) Beiabty 20 Mana o 76 )
Wow and flutter: +0.17% (DIN) . Depth; 173 mm (6-13/16")
Frequency response: Normal tape; 60 Hz — 12,000 Hz welant: 2.3 kg (5.1 tbs.) /each
GrO2 tape; -O0:Hz'— 13,000 Hz Specifications for this model are subject to change without
prior notice.
STRINGING OF DIAL CORD
1. Turn the drum fully in the direction @) shown in Fig. 2—1
and stretch its cord over the parts in the numerical order. Pulley
2.
Then
turn
the
turning
control
shaft
fully
in
the
direction
iN
4
shown in Fig. 2—1 and fix its pointer as shown in Fig. 2—1.
Dial Pointer
Pulley (210) he .
(229) F Spring
7
on
Dial Cord Assembly
(203)
eran Tuning Control Shaft Pulley (239)
540 mm (216)
Figure 2—1
=

Sharp VZ-1550E(BK) Specifications

General

Brand	Sharp
Model	VZ-1550E(BK)
Category	Stereo System
Language	English