Sharp XE-A147 - Mode Switch

1-2
3. MODE SWITCH
1) MODE SWITCH OUTLINE
Type
Rotary switch type with Mode key
STEP
5
2) LAYOUT
3) FUNCTION
Turns the display off. No operations are possible
REG
Permit transaction entry
Permit correction after final a transaction
X/Flash
Permits printing of sales reports and display the
flash reports
Z/PGM
Permits printing and resetting of sales reports and
programming
4. DISPLAY
1) OPERATOR DISPLAY
Display device
LED numeric display
Number of line
1 line
Number of positions 9 digits numeric display (V model)
Color of display
Yellow Green
Character size
Numeric: 14.2 (H) x 8.0 (W) mm
5. PRINTER
1) PRINTER
Printing system Thermal printer
Printing digits
30 digits
Character size
1.25 mm(W) x 3.0 mm (H)
Printing speed
Approx. 7lines / Sec.
Cutter type Manual
Validation printing
None
Logo stamp
None
Ink roller
None
Ink Ribbon None
Graphic Logo Print
Yes (Size: 360 mm(W) x 180 mm(H))
Paper end sensor
Receipt side
Yes
Journal side None
Paper near end sensor
Receipt side
None
Journal side
None
Printer cover key None
2) PAPER
Paper type
Thermal paper
Paper roll width 57.5 ±0.5mm
Paper roll diameter
φ80mm
Paper Thickness
72 to 78μm
Paper weight
66 to 72g/m
2
6. DRAWER
1) DRAWER BOX AND DRAWER
Material
Plastic
Bell
--
Release lever
Standard equipment: situated at the
bottom
Drawer open sensor
--
2) MONEY CASE
Separation from the drawer
Disallowed
Separation of the bill
compartments from the coin
compartments
Allowed
Bill separator
-
Number of compartments
3B/6C (V model)