Sharp XE-A147 - Mode Switch and Mode Key; Keyboard

2-1
CHAPTER 2. OPTIONS
1. OPTIONS
Product name Model Description
Optional battery XE-A1BT
Optional battery
(for XE-A147)
2. SERVICE OPTIONS
Parts code
Price
rank
Description
LANGK7612BHZZ AF
Fix angle A
(for tumble prevision)
LANGK7613BHZZ AN
Fix angle B
(for tumble prevision)
XHBS730P06000 AC Screw (for set the fix angle)
3. SUPPLIES
Item Parts code
Price
rank
Description
Roll paper DPAPR1025CSZZ AV
5 Rolls / Pack
(For XE-A107)
INK Roller NROLR1022RCZB AZ
Ink roller
(For XE-A107)
Thermal
paper
TPAPR6656RC05 BA
5 Rolls / Pack
(For XE-A137 /
XE-A147)
*Handled as service parts
4. SPECIAL SERVICE TOOLS
Parts code
Price
rank
Description
UKOG-2374RCZZ AV
RS232C loop back test tool
(For XE-A147)
CHAPTER 3. MASTER RESET
Master reset:
Clears all the memory and initializes each preset parameter.
The master reset should be performed by using the following
procedure.
1. Turn off the power (Power OFF). (See Note 1))
2. Let the ECR be without the memory back up battery.
3. Turn the mode switch to the others of Power-off position.
4. Turn on the power (Power ON). (See Note 2))
When the master rest is completed, the buzzer sounds
intermittently three times.
5. Attach the memory back up battery to the ECR.
The master reset can also be accomplished in the following
case. (See Note 3))
Note 1) Power OFF:
Means disconnecting the AC power supply to the
machine. (Specifically, unplugging the machine)
Note 2) Power ON:
Means connecting the AC power to the ma-chine.
(Specifically, plugging in the machine)
Note 3) In case a power failure occurs when the machine
has no battery installed, the master reset operation is
automatically performed after the power has been
restored.