Sharp XE-A201 - Preset Unit Price Programming; Price Lookup Programming

10
XEA-201 and XEA-401 preset unit price and price look up
The preset unit price function assigns a frequently purchased item to a department key
and enables you to enter the price by simply pressing the department key
Program Preset Prices
• Switch register to PGM mode
• enter the price (ex: $1.00 = 100)
• Press the department key you wish to set
• Press the CA/AT/NS key
The PLU function allows speed key entries whereby a price is automatically called up
when a code is entered. The subdepartment is an “open PLU” which requires you to
enter a price after the PLU code is entered. Up to 1200 PLU/subdepartment settings in
the XEA-201 and 1800 PLU/subdepartments in the XEA-401 are possible. Each one
belongs to a department and acquires the departments’ parameters (tax status, sign,
(Positive/negative) etc.
Program PLU’s
• Switch register to PGM mode
• Enter PLU code (starting with) usually 1
• Press the PLU/SUB key
• enter the price
• Press the department key
•
Press the CA/AT/NS key
Department keys 21 – 40 press the department shift key before pressing department key
For PLU’s associated with departments 41 – 99 follow the below procedure:
• Switch register to PGM mode
• Enter PLU code
• Press the PLU/SUB key
• Enter price
• Press department key
• Press #/TM/SBTL key
•
Press CA/AT/NS key