11
XEA-201 and XEA-401 percent key programming
The percent key can be used to take off a preset amount or an “open” amount. This is
usually used for discounts. Ex: To take 10% off
Program percent key
• Put register in PGM mode
• Enter percent rate (ex: 10% off would be 10)
• Press the %1 key
•
Press the CA/AT/NS key
Program percent key parameters
• Put register in PGM mode
• Set parameters
• Press @/for key
• Press %1 or %2 key
•
Press CA/AT/NS
A = Tax 4 status: 1 = Taxable
0 = Non-Taxable
B = Tax 3 status: 1 = Taxable
0 = Non-taxable
C = Tax 2 status: 1 = Taxable
0 = Non-taxable
D = Tax 1 status: 1 = Taxable
0 = Non-taxable
E = +/- Sign 0 = + (premium) sign
1 = -(discount) sign
F = Item %/Item 0 = allow
1 = Disallow
G = Subtotal %/Sub - 0 = allow
1 = disallow
H = Entry Digit limit 0 – 7
When programming the percent keys, always enter 0 for parameter H.
To Next Page
