XE-A301V SPECIFICATIONS
– 3 –
6. PRINTER
6-1. PRINTER
6-2. PAPER
6-3. LOGO STAMP
• No
6-4. CUTTER
• Method : Manual
6-5. PRINTING AREA
Receipt & Journal
7. DRAWER
[OUTLINE]
• Standard equipment: Yes
• Max. number of additional drawers: 0
• The drawer consists of:
1) Drawer box (outer case) and drawer
2) Coin case (for SEC)
3) Money case
4) Lock (attached to the drawer)
[SPECIFICATION]
7-1. DRAWER BOX AND DRAWER
7-2. MONEY CASE
7-3. LOCK (LOCK KEY : LKGIM7331BHZZ)
8. BATTERY
8-1. MEMORY BACK UP BATTERY
• Part number: PR-45M II
• NO. of station: 2 (Receipt and journal)
• Validation: No
• Printing system: Line thermal
• No. of dot: Receipt 288 dots
Journal 288 dots
• Dot pitch: Horizontal 0.125mm
Vertical 0.125mm
• Font: 10 dots (W) u 24 dots (H)
• Printing capacity: Receipt max. 24 characters
Journal max. 24 characters
• Character size: 1.25mm (W) u 3.0mm (H) at 10 u 24 dots
• Print pitch: Column distance 1.5mm
Row distance 3.75mm
• Print speed: Approximate 50mm/s (13.3 lines/sec)
• Paper feed speed:
(Manual feed)
Approximate 40mm/s
• Reliability: Mechanism MCBF 5 million lines
Head life 12.5 million characters
(at 4 dots/1 character/1 element)
• Paper end sensor: Set up (Receipt and journal)
• Cutter: Manual
• Near end sensor: No
• Paper roll dimension: 44.5 m 0.5mm in width
Max. 80mm in diameter
• Paper quality: (Journal/Receipt)
High-quality paper
paper thickness: 0.06 to 0.08mm
Nihon seisi thermal paper: TF50KS-E
Oji thermal paper: PD150R, PD160R
0.125
Receipt
Journal
(units;mm)
36
(288dots)
(112dots)
(688dots)
Number of themal head heater elements 864 dots
(288dots)
3614
4
4.5
44.5 0.5 44.5 0.5
Model name of the drawer box SK420
Size 355 (W) x 420 (D) x 118 (H) mm
color Gray (PB-N8.0)
Material Metal
Bell –
Release lever Standard equipment: situated at the
bottom
Drawer open sensor –
Separation from the main unit –
Separation from the drawer Allowed
Separation of the bill compartments from the coin com-
partments
Allowed
Bill separator Disallowed
Number of compartments 5B/8C
Location of the lock: Front
Method of locking and unlocking:
To lock, insert the drawer lock key into the lock
and turn it 90 degrees counter clockwise.
To unlock, insert the drawer lock key and turn it 90
degrees clockwise.
Key No: SK1-1
Built-in battery: Rechargeable batteries, memory holding time about 1
month (with fully charged built-in batteries, at room
temperature)
SK1-1
L
o
c
k
u
n
l
o
c
k
To Next Page
Loading...
