XE-A302U SPECIFICATIONS
– 3 –
6. PRINTER
6-1. PRINTER
6-2. PAPER
6-3. LOGO STAMP
• No
6-4. PRINTING AREA
Number of thermal head heater elements 288 dots
7. DRAWER
[OUTLINE]
• Standard equipment: Yes
• Max. number of additional drawers: 0
• The drawer consists of:
1) Drawer box (outer case) and drawer
2) Coin case (for SEC)
3) Money case
4) Lock (attached to the drawer)
[SPECIFICATION]
7-1. DRAWER BOX AND DRAWER
7-2. MONEY CASE
7-3. LOCK (LOCK KEY : LKGIM7331BHZZ)
8. BATTERY
8-1. MEMORY BACK UP BATTERY
• Part number : M-T53II
• NO. of station : 1 (Receipt or journal)
• Validation : No
• Printing system : Line thermal
• No. of dot : 288 dots
• Dot pitch : Horizontal 0.167mm
Vertical 0.174mm
• Font : 10 dots (W) x 24 dots (H)
• Printing capacity : max. 24 characters
• Character size : 1.67mm (W) x 4.17mm (H) at 10 x 24 dots
• Print pitch : Column distance 2.0mm
Row distance 5.21mm
• Print speed : Approximate 60mm/s (12 lines/sec)
• Paper feed speed
(Manual feed)
: Approximate 60mm/s (12 lines/sec)
• Reliability : Mechanism LIFE 6 million lines used to high-
quality thermal paper
• Paper end sensor : Set up
• Cutter : No
• Near end sensor : No
• Paper roll dimension : 57.5 m 0.5mm in width
Max. 80mm in diameter
• Paper quality : High-quality thermal paper
paper thickness: 0.06 to 0.08mm
0.167
(4.75) (4.75)48 (288 dots)
print area
(max.24 characters)
(units : mm)
57.5±0.5
(Paper dimension)
Model name of the drawer box SJ423
Size 420 (W) x 426 (D) x 114 (H) mm
16.5 (W) x 16.8 (D) x 4.5 (H) inches
Color Gray (PB-N8.0)
Material Metal
Bell —
Release lever Standard equipment: situated at the
bottom
Drawer open sensor —
Separation from the main unit —
Separation from the drawer Allowed
Separation of the bill compartments from the
coin compartments
Allowed
Bill separator Allowed
Number of compartments 5B/6C
Location of the lock: Front
Method of locking and unlocking:
To lock, insert the drawer lock key into the lock
and turn it 90 degrees counter clockwise.
To unlock, insert the drawer lock key and turn it
90 degrees clockwise.
Key No: SK1-1
Built-in battery: Rechargeable batteries, memory holding time about 1
month (with fully charged built-in batteries, at room
temperature)
5B/6C
SK1-1
L
o
c
k
u
n
l
o
c
k
To Next Page
Loading...
