Sharp XE-A402

PC-UM10M
XE-A402 SPECIFICATIONS
– 3 –
6. PRINTER
6-1. PRINTER
• Part number : PR-45M II
• NO. of station : 2 (Receipt and journal)
• Validation : No
• Printing system : Line thermal
• No. of dot : Receipt 288 dots
Journal 288 dots
• Dot pitch : Horizontal 0.125mm
Vertical 0.125mm
• Font : 10 dots (W)
u
24 dots (H)
• Printing capacity : Receipt max. 24 characters
Journal max. 24 characters
• Character size : 1.25mm (W)
u
3.0mm (H) at 10
u
24 dots
• Print pitch : Column distance 1.5mm
Row distance 3.75mm
• Print speed : Approximate 50mm/s (13.3 lines/sec)
• Paper feed speed : Approximate 40mm/s
(Manual feed)
• Reliability : Mechanism MCBF 5 million lines
Head life 12.5 million characters
(at 4 dots/1 character/1 element)
• Paper end sensor : Set up (Receipt and journal)
• Cutter : Manual
• Near end sensor : No
6-2. PAPER
• Paper roll dimension: 44.5
m
0.5mm in width
Max. 80mm in diameter
• Paper quality : (Journal/Receipt)
High-quality paper
paper thickness: 0.06 to 0.08mm
Nihon seisi thermal paper : TF50KS-E
Oji thermal paper : PD150R,
PD160R
6-3. LOGO STAMP
• No
6-4. CUTTER
• Method : Manual
6-5. PRINTING AREA
Receipt & Journal
7. DRAWER
[OUTLINE]
• Standard equipment: Yes
• Max. number of additional drawers: 0
• The drawer consists of:
1) Drawer box (outer case) and drawer
2) Coin case (for SEC)
3) Money case
4) Lock (attached to the drawer)
[SPECIFICATION]
7-1. DRAWER BOX AND DRAWER
7-2. MONEY CASE
7-3. LOCK (LOCK KEY : LKGIM7331BHZZ)
• Location of the lock: Front
• Method of locking and unlocking:
To lock, insert the drawer lock key into the lock
and turn it 90 degrees counter clockwise.
To unlock, insert the drawer lock key and turn it
90 degrees clockwise.
•Key No: SK1-1
8. BATTERY
8-1. MEMORY BACK UP BATTERY
Built-in battery: Rechargeable batteries, memory holding time about 1
month (with fully charged built-in batteries, at room tem-
perature)
0.125
Receipt
Journal
(units;mm)
36
(288dots)
(112dots)
(688dots)
Number of themal head heater elements 864 dots
(288dots)
3614
4
4.5
44.5 0.5
44.5 0.5
Model name of the drawer box SJ423
Size
420 (W) x 427 (D) x 114 (H) mm
16.5 (W) x 16.8 (D) x 4.5 (H) inches
color Gray (PB-N8.0)
Material Metal
Bell –
Release lever Standard equipment: situated at
the bottom
Drawer open sensor –
Separation from the main unit –
Separation from the drawer Allowed
Separation of the bill compartments from the coin
compartments
Allowed
Bill separator Disallowed
Number of compartments 5B/6C
5B/6C
SK1-1
L
o
c
k
u
n
l
o
c
k