Sharp XE-A402

64
• When both sales quantities and sales amounts are zero, printing is skipped. If you do not want to
skip, change the programming. (Refer to “Print format” of “Various Function Selection
Programming 1”.)
• “X” represents read symbol and “Z” represents reset symbol in the reports.
• To stop reading and resetting the PLU/UPC sales report, turn the mode switch to the MGR
position. The data will not be erased when you reset.
Item
Mode switch position
Key operation
OPX/Z X1/Z1 X2/Z2
X2, Z2
X2, Z2
Total in drawer
report
X1
X1 X2
2A
Reading:
--
--
--
--
--
X, Z
Full clerk report
Hourly report
(full)
X1, Z1
X1, Z1
--
--
--
--
--
Individual clerk
report
P
KK
Reading: Resetting:
P
KK
Reading: Resetting:
P
ss
Reading: Resetting:
Hourly report
(by range)
s@
Reading: Start time End time
Daily net report
P
ss
Reading: Resetting:
(The report of the current clerk)
(hour) (hour)