Basic Operation
-37
Turning the Power off
1
Press
STANDBY
on the projector
or
on the remote control,
then press that button again
while the confirmation message
is displayed, to put the projec-
tor into the standby mode.
Note
• If you accidentally pressed
STANDBY
or and do not want
to put the projector into the standby
mode, wait until the confirmation
message disappears.
• The projector cannot be operated
while a message “Shutting Down.
Please Wait.” is displayed.
2
Unplug the power cord from the
AC outlet after the cooling fan
stops.
Info
• Do not unplug the power cord dur-
ing projection or cooling fan opera-
tion. This can cause damage due to
the rise in internal temperature, as
the cooling fan also stops.
MUTE button
STANDBY button
ENTER button
MENU
button
', ", \, |
buttons
To Next Page
Loading...
Need help?
General
