Sharp XG-C55X User Manual

-60
Color Management System (C. M. S.)
Selecting the Color
Reproduction Mode
Select “Color Selected” in the “C.M.S.”
menu on the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
Note
• For additional information about sRGB
function, visit “http://www.srgb.com/”.
• “sRGB” cannot be selected for “Color Se-
lected” on the C.M.S. menu when “Com-
ponent” is selected for “Signal Type” on
the “Picture” menu.
• When “sRGB” is selected;
• The gamma correction cannot be set.
• “Red”, “Blue” or “CLR Temp” in “Picture”
cannot be adjusted.
• If “Standard” or “sRGB” is selected for
“Color Selected”, other items (e.g., Target)
cannot be adjusted.
Info
• When “sRGB” is selected, the projected
image may become dark; however, this
does not indicate a malfunction.
Selecting the Target
Color
Select “Target” in the “C.M.S.” menu on
the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
This function allows you individually adjust the display characteristics of six colors (R: Red,
Y: Yellow, G: Green, C: Cyan, B: Blue, M: Magenta) .
Red Cyan
Yellow Blue
Green Magenta
-60
Description
Sharp default setting
“Lightness”, “Chroma” and “Hue” can
be adjusted for each of the six colors.
The mode changes to sRGB
Selected item
Standard
Custom 1-3
sRGB

Sharp XG-C55X Specifications

General

Brand	Sharp
Model	XG-C55X
Category	Projector
Language	English