Sharp XL-3000 - Timer and Sleep Operations; Timer Playback Setup

01/1/17 XL-3000(U2)3.fm
25
Advanced Features
- Timer and Sleep Operation -
Timer and Sleep Operation
This may be operated only with the remote control.
Timer playback:
The unit turns on and plays the desired source (CD, tuner) at the
preset time.
Sleep operation:
The radio and compact disc can all be turned off automatically.
„
Timer playback
Before setting timer:
Continued to the next page
1 Press the CLOCK button to check that the clock is on time.
2 Load a disc to be played.
1
Press the POWER button to turn the power on.
2
Press the CD or TUNER button to select the desired
function.
When you selected the TUNER, tune in to the desired sta-
tion.
3
Adjust the volume using the VOLUME buttons.
Do not turn the volume up too high.
4
Press the TIMER button and within 6 seconds, press
the MEMORY button.
5
Within 1 minute, press the PRESET ( or ) button to
specify the hour to start, then press the MEMORY but-
ton.
Setting the Clock (See page 17.) / Listening to the Radio (See page 22.)